C-EP 336/936 Technical Data Sheet

PRODUCT DESCRIPTION 產品描述

C-EP 336/936 is a liquid, hot cure, two component epoxy casting system. The cured system exhibit high mechanical, especially, high thermal shock resistance and high glass transition temperature. Application includes indoor medium and high voltage electrical insulating components, such as switch, encapsulation of large metal components with following advantages. C-EP 336/936是一種液態，熱固化，雙組分環氧樹脂澆鑄灌封系統。該產品固化后表現出高的抗機械沖擊性能，特別的優點在于其高的抗熱沖擊性能和高的玻璃化轉變溫度。該產品的應用范圍包括室內中高電壓用的電絕緣組件的制造，如開關和一些大型金屬零部件的密封等并具有以下優點。

Long term stresses with service temperature up to 85 °C. 可長時間在85 °C以上工作.
Very high thermal shock resistance. 極高的抗熱沖擊性能.
High mechanical and electrical properties at elevated temperature. 在溫升下具有好的機械性能和電學性能.
Good balance of toughness and elevated glass transition temperature.韌性和高的玻璃化轉變溫度的完美平衡.

PROPERTIES OF UNCURED MATERIAL 固化前材料性能

Properties 性能	Test Method 測試方法	Resin-336 樹脂-336	Hardener-936 固化劑-936
Color/Appearance 顏色/外觀	Visual 目測法	viscous Liquid 粘性液體	natural Liquid 自然色液體
Specific Gravity 比重	ASTM D-792	1.18	1.21
Viscosity @ 25°C, cps 粘度（25°C）	ASTM D-2393	9,000-14,000	350
Shelf life, 25°C, month保質期，月		12	12

TYPICAL CURED PROPERTIES 固化后屬性

Property 性能	Test Method 測試方法	value 數值
Specific gravity 比重, g/cc		1.78 @60% filler
Elongation at break 斷裂伸長率, %		1.3
Tensile strength拉伸強度, Mpa		80
Tensile modulus拉伸模量, Mpa		11,000
Flexural strength 撓曲強度, Mpa	ASTM D790	125(25oC),120(80oC)
Compressive strength抗壓強度, Mpa		148
Critical stress intensity factor, 臨界應力強度因子K_1C, Mpa.m^1/2		2
Impact strength沖擊強度, kJ/m²		9 (25 oC),10 (80 oC)
Glass transition temperature玻璃化轉變溫度, oC		120
Thermal conductivity 熱導率, w/m-k		0.9
Coefficient of thermal expansion 熱膨脹系數, CTE	ASTM D3386	35 E-06
Water absorption 吸水率, % weight, 10days, 25 oC		0.12
Flammability rating 易燃等級	UL94	V-1(12mm),HB(4mm)
Thermal aging class 熱老化等級, 20000 hours	IEC	Class H
Thermal endurance by flexural strength 撓曲強度下的耐熱程度, 20000/5000 h		199/240 oC
HV Arc resistance 抗電弧性, seconds	ASTM D945	185
Breakdown strength, 擊穿強度3mm, kV/mm		20

DIRECTIONS FOR USE 使用指南

Mix Ratio by Weight 重量比

Resin-2336 樹脂-336	100
Hardener-936 固化劑-936	80
Silica Filler 二氧化硅填料	270

POT LIFE 使用時間

Effective pot life is about 2 days at temperature 25 oC. 在25 oC有效使用時間大約為2天.

Automatic Pressure Gelation Process 自動壓力凝膠工藝(APG)

Pre-heat mold at 130-160 °C 將模體預熱到130-160 °C
Gel in mold for 20-40 minutes在模體中凝膠20-40分鐘
Post cure 3 hrs @140 °C 在140 °C下固化3小時

Conventional Gravity Casting Process Under Vacuum 常規重力真空澆注工藝

Pre-heat mold to 80- 100 °C 將模體預熱到80-100°C
Fill mold under vacuum and gel for 5-8 hrs在真空下將澆注材料填入模體并凝膠5-8小時
Post cure 8 hrs@140°C 后固化8hrs@140°C

SHELF LIFE保存方法

Store at 15 - 25 oC in a dry place. Hardener-936 is moisture sensitive, after each partial use, purge with dry nitrogen and tightly reseal.保存于15 - 25 oC的干燥地方.Hardener-936 容易受潮，每次用完后應用干氮?dú)馇謇砀蓛舨⒚芊獗４?/span>.