產品中心
?
C-UV 913 Technical Data Sheet
產品介紹
C-UV913 is one component, epoxy UV cure, transparent, low viscosity with excellent water vapour barrier properties after cure. C-UV913 is designed to be used as a perimeter sealant in OLED and electrophoretic displays or any other type of display that requires protection against humidity. It is formulated to cure very fast upon exposure to UV light allowing very fast processing of a thin section of material even through ITO coated glass.
C-UV913 是一種單組分環氧樹脂UV固化膠粘劑,透明而且粘度較低,在固化后具有卓越的水蒸氣阻隔性能。C-UV913是被設計用來作為需要防濕的有機發光二極體及電泳顯示器,或任何其他類型的顯示器的周邊密封膠,薄件材料曝露在UV紫外光下能非??焖俚墓袒诳焖俟に囅律踔聊芡ㄟ^鍍膜玻璃完成。
PROPERTIES OF UNCURED MATERIAL 固化前材料性能
Property性能 |
Test Method測試方法 |
Value數值 |
Color/Appearance 顏色/外觀 |
Visual 目測 |
clear liquid 清澈液體 |
Viscosity 粘度, pa·s, 25 °C |
Brookfield 布氏粘度, #7,10 rpm |
0.5 |
Shelf life 儲存期, month |
|
6(2-8℃) |
Cure Schedule : 固化進度表:
A minimum UV dose of 6,0 J/cm2 is needed to fully cure the material. Using a typical UV lamp intensity
of 100 mW/cm2, a full cure will take 60 seconds.Optimal product performance is reached after 24 hours at ambient conditions。
材料充分固化的條件是6焦耳每平方厘米,用一個典型的強度100毫瓦/平方厘米紫外線燈進行一個完整的固化時間將需要60秒。在室溫條件下, 24小時之后達到最佳的產品性能。
DIRECTIONS FOR USE 使用指南
The adhesive can be hand applied from bottle, or dispensing systems are also available for high volume assembly applications.
該產品可手工從瓶中取出使用,對于大體積的裝配生產可提供分散系統。
STORAGE INFORMATION儲存方法
Storage below 2-8°C in the unopened container in a dry location, the shelf life is 6 months.
在2-8 oC條件下密封干燥儲存, 保質期為6個月
注意:用戶具有決定產品的適用性和選擇合適的使用方法的責任。
Note: The users have to determine the suitability of the products and choose the right using method of liability.